Raspberry Pi 3B に Raspbian Buster の最新版(Version September 2019)をｲﾝｽﾄｰﾙし直したので､FeliCa ｶｰﾄﾞを読むために Python 用の NFC ﾃﾞﾊﾞｲｽｺﾝﾄﾛｰﾙﾓｼﾞｭｰﾙである nfcpy も再ｲﾝｽﾄｰﾙした｡
前回は Python 2 用のﾓｼﾞｭｰﾙを入れて､その後 Python 3 用にｲﾝｽﾄｰﾙし直すなどﾊﾞﾀﾊﾞﾀしたが(記事｢Python3 で tagtool.py を実行する｣参照)､今後は基本的に Python 3 での開発しかせんだろうなぁ･･･ということで､Python 3 用にのみｲﾝｽﾄｰﾙ実施｡
pi@raspberrypi:~ $ pip3 list|grep usb
pi@raspberrypi:~ $ sudo pip3 install nfcpy
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting nfcpy
Downloading https://files.pythonhosted.org/packages/7e/ed/3b3a00ada844f8a9229c8a79f460a1a13e870b767a1eb0ee0caf99740e9d/nfcpy-1.0.3-py3-none-any.whl (186kB)
100% |????????????????????????????????| 194kB 952kB/s
Collecting libusb1 (from nfcpy)
Downloading https://www.piwheels.org/simple/libusb1/libusb1-1.7.1-py3-none-any.whl (59kB)
100% |????????????????????????????????| 61kB 102kB/s
Collecting ndeflib (from nfcpy)
Downloading https://files.pythonhosted.org/packages/c9/80/bbc9a4818cd74807f914d225611cd724d8c0e56237b952a9a4aa6d583f5c/ndeflib-0.3.3-py2.py3-none-any.whl (56kB)
100% |????????????????????????????????| 61kB 1.3MB/s
Requirement already satisfied: pyserial in /usr/lib/python3/dist-packages (from nfcpy) (3.4)
Collecting pydes (from nfcpy)
Downloading https://www.piwheels.org/simple/pydes/pyDes-2.0.1-py2.py3-none-any.whl
Installing collected packages: libusb1, ndeflib, pydes, nfcpy
Successfully installed libusb1-1.7.1 ndeflib-0.3.3 nfcpy-1.0.3 pydes-2.0.1
pi@raspberrypi:~/nfcpy/examples $ pip3 list|grep usb
libusb1 1.7.1
pi@raspberrypi:~ $ cd /home/pi/nfcpy/examples/
pi@raspberrypi:~/nfcpy/examples $ sudo python3 tagtool.py
[nfc.clf] searching for reader on path usb
[nfc.clf] using SONY RC-S380/P NFC Port-100 v1.11 at usb:001:004
** waiting for a tag **
Type3Tag 'FeliCa Lite-S (RC-S966)' ID=012E4CD257C68AB3 PMM=00F1000000014300 SYS=88B4